PRODUCT
PRODUCTS
PRE-ANODIZED ALUMINIUM SHEET & COIL
The Description of Anodizing
Anodizing is an electro-chemical process used to create a protective film of aluminium oxide on the surface of aluminium extrusion or sheet. As the aluminium oxide film is created from the aluminium itself, it is integral to the aluminium and cannot crack or peel. Anodizing is translucent giving the aluminium a deep metallic luster and is extremely durable and continues to stand the test of time.
The Advantage of Anodizing
For whatever signature look you desire, make the potential possible with anodized aluminum. There are no limits to elegance, expose the natural metallic brilliance, or have both in one finish For any signature look you desire, anodized aluminum is reflective, customizable, consistent, and 100% recyclable—perfect for making a statement in every way.
The Difference of Coil anodizing and sheet Anodizing
Coil Anodizing: Process is tightly controlled creating a uniform anodic layer resulting in a very consistent surface appearance and elegant colors, no visible iridescence.
THE SHEETS BATCH ANODIZING:An electrical contact must be made on each part which causes a rack mark, or punch some holes on each side of aluminum sheet to facilitate the mounting of the hanger or fixture, the material loss is high.
The sheet batch anodizing is limited by the size of the oxidation tank, lower production efficiency, and it is likely to produce visible color differences.
|
Grade/Temper |
1050-H16/1070-H16/1100-H16/3003-H24/5052-H32/5005-H14 |
|
Thickness |
0.3~3mm |
|
Width |
20-2000mm |
|
Surface Process |
Continuous anodic oxidation, electrolytic coloring and anodic dyeing |
|
Surface |
Satin, matte, fog surface, titanium silver |
|
Color |
Silver, gold, light champagne gold, iron grey, brown bronze, matt black, imitation stainless steel |
|
Film Thickness |
AA5-AA10（Indoor≥5µm），AA15-AA25（Outdoor≥15µm） |
|
Hardness |
≥9H |
|
Total Reflectivity |
≥82% |
|
Color Difference |
There is no obvious color difference by visual inspection, and the color difference value of the same aluminum coil △E≤1.0 |
|
Gloss |
Deviation of the same batch is smaller than 10 |
|
Hole Sealing Quality |
≤30 mg/ d㎡ |
|
Abrasion Resistance |
Sand Fall≥330 g/ µm; Sand Blasting≥3.5 S/ µm; |
|
Heat crack resistance |
≥80℃ no crack |
|
Corrosion resistance |
Indoor plate (more than 72 hours 5%NaCl spray test); Outdoor plate (more than 1000 hours 5%NaCl spray test) |
|
Resistance to Accelerating Weathering |
Test Time≥4000h, Color Difference △E≤5.0. Other aging property is not less than 0 grade. |
|
Standard |
EN 573-3 ，T/CBMF113-2021 |
Application
Signboards, bags, exhibition cabinets and racks, indoor and outdoor building curtain wall decoration, elevator interior trim panel, integrated ceiling, kitchen electrical panel, household electrical panel, electronic product shell, automobile interior and exterior decoration, jewelry boxes, handicrafts, lighting reflector and lamp decoration, advertising word edging and wrapping, etc.
Stain Series
SLAST001
SLAST002
SLAST003
SLAST004
SLAST005
SLAST006
SLAST007
SLAST008
SLAST009
SLAST010
SLAST011
SLAST012
SLAST013
SLAST014
SLAST015
SLAST016
SLAST017
SLAST018
SLAST019
SLAST020
SLAST021
SLAST022
SLAST023
SLAST024
SLAST025
SLAST026
SLAST027
SLAST028
|
|
Its lightness and the combination of a wide range of surface finishes and colours make aluminium the ideal product for architects and designers who are looking for uniqueness in their projects and the guarantee of durability and resistance. Solar stain anodized aluminum designed for Building,the film more than 15um can provide 15years warranty, and available in coils and large plates, creates a seamless design guaranteed by the perfect flatness and uniformity of the surface.
|
Matte Series
SLAM865
SLAM173
SLAM0011
SLAM3100
|
|
The Matte Series has high reflection is unparalleled in the lighting sector because it can integrate the various steps of aluminium treatment with technology and know-how to design, engineer, produce and offer reflectors to the market. |
Mirror Series
ART100
A20
A17
A30
|
|
Solar Mirror Series is able to integrate the various phases of aluminium production with the technologies and know-how to design, engineer and manufacture reflectors. The production sites process pure aluminum with continuous anodization and Roalled Mirror processes to obtain highly reflective and homogeneous surfaces. |
Brush Series
N510 20
S510
N510 12
N510B
|
|
While its resilience and resistance to high temperatures make anodized aluminium ideal for license plates and signs, also industrial ones,Solar's care in creating a growing range of finishes and colours attracts the designers of hotels, cruise ships and other prestigious environments or objects in which functional and aesthetic needs must be combined harmoniously. |
Other Anodized Aluminum Series
High Glossy
Sandblasting
Orange peel
Hammer
|
|
We supply high quality products by handling the entire production cycle, from the choice of the material up to the serial production on industrial scale and including the creation of the prototype. Our lean, agile and versatile structure provides both assembled and disassembled products. The application field has no limits, from lighting to electronic devices, from brand to building items. |
Subscribe to our newsletter to receive exclusive information about us and our services
