1.AegisArt®PRE-ANODIZED ALUMINIUM SHEET & COIL-Shanghai Solar Aluminum Co., Ltd

PRODUCTS

PRODUCT

PRODUCTS

AegisArt®pre-anodized Aluminium Sheet & Coil

The Description Of Anodizing

AegisArt® Pre-Anodizing is an electro-chemical process used to create a protective film of aluminium oxide on the surface of aluminium extrusion or sheet. As the aluminium oxide film is created from the aluminium itself, it is integral to the aluminium and cannot crack or peel. Anodizing is translucent giving the aluminium a deep metallic luster and is extremely durable and continues to stand the test of time.

The Advantage Of Anodizing

Anti-scratching and surface hardness up to sapphire's grade

Good Corrosion Resistance

Non-combustible

Anti-fingerprint

100% Recyclable

Easy maintenance

THE DIFFERENCE OF COIL ANODIZING AND SHEET ANODIZING.

Continuous Anodizing:

Process is tightly controlled creating a uniform anodizing layer resulting in a very consistent surface appearance and elegant colors, no visible iridescence.

The Sheets Batch Anodizing:

An electrical contact must be made on each part which causes a rack mark, or punch some holes on each side of aluminum sheet to facilitate the mounting of the hanger or fixture, the material loss is high. The sheet batch anodizing is limited by the size of the oxidation tank, lower production efficiency, and it is likely to produce visible color differences.

Technical Parameter

Grade/Temper	1050-H16/1070-H16/1085-H18/1100-H16/3003-H24/5052-H32/5005-H14
Thickness	0.3~3mm
Width	20-2000mm
Surface Process	Continuous Anodizing, electrolytic coloring and anodizing dyeing
Surface	Satin, Matte, Glossy, High Reflective, Brush
Color	Silver, Gold, Light Champagne Gold, Iron Grey, Brown Bronze, Matte Black, Imitation Stainless Steel
Film Thickness	AA5-AA10（Indoor≥5µm），AA15-AA25（Outdoor≥15µm）
Hardness	≥9H
Total Reflectivity	≥82%
Color Difference	No color difference by visual inspection, and the color difference value of the same aluminum coil △E≤1.0
Gloss	Deviation of the same batch is smaller than 10
Hole Sealing Quality	≤30 mg/ d㎡
Abrasion Resistance	Sand Fall≥330 g/ µm; Sand Blasting≥3.5 S/ µm;
Heat crack resistance	≥80℃ no crack
Corrosion resistance	Indoor plate (more than 72 hours 5%NaCl spray test); Outdoor plate (more than 1000 hours 5%NaCl spray test)
Resistance to Accelerating Weathering	Test Time≥4000h, Color Difference △E≤5.0. Other aging property is not less than 0 grade.
Standard	EN 573-3 ，T/CBMF113-2021

AegisArt® Stain Series

AegisArt® Anodizing is renowned for durability in salt water environments. AegisArt facade materials has been engine-eered to maximize these features and is even harder, denser and more durable.

N91505

Sliver

N91505۰50-2

Sliver Green

N91505۰16

Stainless

N91505۰15-3

Slat Grey

N91505۰15-6

Charcoal Grey

N91505۰40-7

Steel Blue

N91505۰40-4

Medium Blue

N91505۰40-2

Azure Blue

N91505۰50-2

Bean Green

N91505۰50-4

Grass Green

N91505۰50-8

Dark Green

N91505۰50-6

Wilderness

N91505۰70-1

Sandstone

N91505۰70-3

Beige

N91505۰70-4

Pale Bronze

N91505۰70-5

Light Bronze

N91505۰70-6

Medium

N91505۰70-8

Dark Bronze

N91505۰70-9

Espresso

N91505۰17

Black

N91505۰15-9

Chestnut

N91505۰30

Rose Gold

N91505۰1

Titanium

N91505۰25

Brass

Technical Parameter

Alloy				5005 H14			Standard		GB Standard
Tensile Strength/Mpa				Yield strength/Mpa					Elongation/%
154				145					6.5
Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti		Other	Al
0.07	0.18	＜0.01	0.08	0.85	0.02	-	＜0.01	-		≤0.05	other

AegisArt® Matte Series

S600

S270

S600G

S280

PRODUCT INTRODUCTION

Matte anodized aluminum plate is also called Titanium silver anodized aluminum plate. The surface is anodized, so it is anti fingerprint and anti scratch. .

Technical Parameter

Product	Type	Total Reflectance[%]		Specular Reflectance[%]		Diffuse Reflectance[%]	Iridescence scale 1-4	Alloy Purity
		ASTM E 1651	DIN 5036-3	60° long	60° trans	DIN 5036 - 3
S600	matt	85	85	70	65	66	3	Al 99.9
S600G	Diffuse matte	83	83	32	10	80	2	5005
S270	stripe	-	-	not relevant		-	3	5005

Application Cases

Alton® Mirror Series

ART100

Sliver Mirror

A20

Light Gold Mirror

A30

Rose Gold Mirror

A17

Black Mirror

PRODUCT INTRODUCTION

Alton® Mirror Series is refer to anodized mirror aluminum plate, which is made of 1085 pure aluminum plate with aluminum content up to 99.85% by rolling and anodizing.

Technical Parameter

Alloy		1085 H18			Reflectance	86%	Standard	EN485/2
Tensile Strength/Mpa				Yield strength/Mpa				Elongation/%
169				161				4
Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Other	Al
0.035	0.047	0.001	0.001	0.0	0.0	0.002	＜0.01	0.02	-	≥99.85

AegisArt® Brush Series

S518

S516 16

N515

N510 12

PRODUCT INTRODUCTION

Brushed anodized plate is made by brushing and anodizing on the surface of aluminum plate. According to different silk patterns, it can be divided into different silk patterns, such as long drawn plate, medium drawn plate and snowflake plate.