PRODUCT
PRODUCTS
7005 Aluminum Plate
7005 Aluminum Plate
7005 aluminum sheet belongs to Al-Zn-Mg-Cu series super-hard aluminum. It is a cold treated forged alloy with high strength, far superior to mild steel, and higher than 7003 alloy. The strength is not as good as 6061 aluminum sheet, but the weight of 7005 aluminum sheet is light, and the typical lightweight aluminum material. 7005 is one of the strongest commercial alloys. Good welding performance, heat treatment can be carried out to enhance strength. Because of its relatively easy welding, it does not require expensive heat treatment. However, its manufacture is more challenging.
|
Alloy |
7005 |
|---|---|
|
Temper |
O、T6、T651、T7451 |
|
Thickness（mm） |
16-200mm |
|
Width（mm） |
2600mm |
|
Application |
russ, rod, and container of vehicles or aircraft |
Using
It is the most suitable aluminum alloy for making bicycle frames, and it can also be used to make sports equipment such as tennis rackets and softball sticks
Applications And Features:
■ The most typical characteristic is its weldability. There are many other aluminum alloys, such as 7075 and 2014 are stronger than 6061 and 7005, but they are almost impossible to weld.
■ It has a high density, 2.78 g / cm3, and may be slightly stronger depending on the tempering. No precipitation hardening is required, but it can be cooled in air.
■ It has a high density, 2.78 g / cm3, and may be slightly stronger depending on the tempering. No precipitation hardening is required, but it can be cooled in air.
■ The level of anodizing reaction is good. It can perform both hard oxidation and solid color coating oxidation.
■ High-strength heat treatment, good mechanical properties, good usability, easy processing, good wear resistance, etc.
Application
OIP-C
Industrial radiator
Automobile lightweight
Golf club
7050 Aluminum Plate
7050 Aluminum Plate
7050 aluminum sheet is a high-strength heat-treatable alloy. It is based on 7075 aluminum alloy, which increases the Zn, Cu content and Cu / Mg ratio to increase the strength, and replaces Cr with Zr to overcome the quenching sensitivity problem and inhibit recrystallization. 7050 aluminum sheet is an alloy that has been around for decades and is known for its ability to remain strong over time. Although other alloys are available which are stronger on a one-off comparison basis, but they do not necessarily prove the longevity which the 7050 products can offer.
|
Alloy |
7050 |
|---|---|
|
Temper |
O、T6、T651、T7451 |
|
Thickness(mm) |
16-200mm |
|
Width(mm) |
2600mm |
|
Application |
various molds, fixtures, mechanical equipment |
Applications And Features
■ Compared with 7075 aluminum sheet, 7050 aluminum has higher corrosion resistance and better toughness.
■ Has lower quenching sensitivity. This allows it to maintain its strength properties, stress corrosion cracking resistance and fracture toughness levels.
■ The cold workability of 7050 aluminum sheet is not good, but it can be processed.
■ 7050 aluminum sheet also has good anodizing reaction.
■ Welding methods are not recommended, such as brazing, gas shielded arc welding or coated metal arc welding.
Application
OIP-C
Precision mold
Automobile lightweight
Golf club
7075 Aluminum Plate
7075 Aluminum Plate
7075 aluminum sheet belongs to Al-Zn-Mg-Cu superduralumin, which is a cold-treated forging alloy with high strength and hardness, far better than soft steel. Due to the fine grain structure inside 7075 aluminum alloy, it has excellent deep drilling performance, enhanced wear resistance of tools, good mechanical properties and anode reaction. At present, 7075 aluminum sheet is the preferred metal material under the requirement of lightweight conditions with lower density and
higher hardness. It is one of the most potential alloys for commercial use.
|
Alloy |
7075 |
|---|---|
|
Temper |
O、T6、T651 |
|
Thickness(mm) |
0.2-300mm |
|
Width(mm) |
1500mm |
|
Application |
russ, rod, and container of vehicles or aircraft |
Using
Shoe mold, high-hardness mold, high-end mobile phone shell, thick plate, heavy forging and golf components, precision parts and aircraft
Performance
■ Shoe mold, high-hardness mold, high-end mobile phone shell, thick plate, heavy forging and golf components, precision parts and aircraft
■ Shoe mold, high-hardness mold, high-end mobile phone shell, thick plate, heavy forging and golf components, precision parts and aircraft
■ The cold workability of 7050 aluminum sheet is not good, but it can be processed.
■ 7050 aluminum sheet also has good anodizing reaction.
■ Welding methods are not recommended, such as brazing, gas shielded arc welding or coated metal arc welding.
Application
Golf club
Molded aluminum plate
Automobile lightweight
Mobile phone shell
Subscribe to our newsletter to receive exclusive information about us and our services
